Item Code: RC0319
Anti-Static Mats | ESD Sensitive Environments
Conforms to BS IEC 61340-5-1
Two layer rubber with a dissipative top and conductive backing
The Rubber Company supply anti-static mats for use in ESD sensitive environments. These mats conform to meet BS IEC 61340-5-1 standards. All of our anti-static mats mats are incredibly low maintenance and provide excellent safety properties in a variety of applications.
The dissipative top layer of our anti-static mats provide great resistance to abrasion, heat, solders, flux as well as the most commonly used solvents. This ensures that our product is suitable for use in a wide variety of applications. It also helps to ensure that our anti static mats are able to maintain a long life expectancy.
The black bottom layer of our anti static mats are fully conductive. This ensures that the mats provide a high quality and consistent ground path. The material meets the requirements of EN61340-5-1 and US ESD Associations ANSI S4.1 and S20.20 guidelines and is also certified for ROHS regulations. The smooth texture also facilitates easy cleaning and maintenance.
- Conforms to BS IEC 61340-5-1
- Highly flexible
- Excellent lay flat properties but easily studded if required for custom fits
- High resistance to oil
- High temperature resistance
- Highly resistant to abrasion
- High temperature resistance
- ESD properties outperform PVC based products (budget priced PVC mats do not resist solder or heat damage)
- No curling or deformation
- No fading in sunlight
- Easily cleanable with excellent resistance to detergents
- Good resistance to scratching, curling, pin holes
- Good recovery
- No irritant odour
High Quality Material
We manufacture our anti-static mats from a synthetic rubber compound as it is important that the two layers offer different properties. The top layer is highly resistant to oil, abrasion, heat as well as common solvents. This ensures that the top surface of the mats are able to withstand a variety of abrasive substances without warping or deteriorating. While the bottom layer provides excellent conductive properties. This ensures that the mats are able to maintain a consistent ground path at all times. The combination of these properties create a product which offers unbeatable safety in ESD sensitive environments.
The Rubber Company manufacture and supply a wide variety of electrical safety matting and flooring products to suit any environment. If you are unsure which product is best suited to your unique requirements, don’t hesitate to get in contact with us.
If you haven’t found what you are looking for, click here to view our full range of electrical safety matting products.
|Construction/Material Overall thickness:||Synthetic rubber - Two layer, static dissipative top surface; Black conductive bottom layer 2mm (0.076 inches) (supplied as standard with surface and base layer both 1mm; other options available as special order)|
|Colour options:||Grey, Blue, Beige, Green (variation possible between batches)|
|Shore Hardness:||as per ASTM D2240 75 +/-5º Shore A|
|Heat resistance:||Undamaged by iron and solder temperature 260º C|
|Chemical resistance:||IPA, Acetone or common solvents will not produce discolouration|
|UV resistance:||No discolouration or fading effect|
|Charge Decay:||< 0.1 sec per FTMS 101C, M4046|
|Charge generation:||< 100 volts per ANSI/ ESD STM4.2|
|Stud force:||6 kgs/ 59cm (Recommended)|
|Roll sizes:||Standard rolls 10m x 1.2m (1.4 m or 60cms roll width and cut mats - special order)|
|Test item||Test result|
|Breakage coefficient of elongation||188%|
|Tear strength (right angle)||20.6KN/M|
|Resilience (6 pcs overlapping)||14%|
|Temperature of impact embrittlement (not cut)||-25ºC no damage|
|Permanent variation under 70 o C x 22h, 25% compression||17.9%|
|Aging in hot air (70ºC x 22h)||Variation of tension strength||+8%|
|Variation of breakage coefficient of elongation||-3.8%|
|Test standard: GB1040, GB/T529, GB1681, GB5470, GB10654, GB/T7141|
The Rubber Company
Unit 27 Romsey Industrial Estate