Item Code: RC04133
Electrical Matting with ASTM D178 Safety Standard
This Electrical Matting with ASTM D178 Safety Standard is a high quality rubber matting with a fine ribbed surface. This electrical safety matting has the regulation standard stamped on the reverse of the roll at 1000mm intervals.
This rubber safety matting provides an anti-slip surface with fine ribbed finish on one side and a cloth impression finish on the reverse.
The Rubber Company supply electrical matting ASTM D178 Type 1 in:
Class 1 – Dielectric test voltage: 20,000 volts • Surface proof tested: 10,000 volts • Maximum safety working voltage: 7,500 volts.
Class 2 – Dielectric test voltage: 30,000 volts • Surface proof tested: 20,000 volts • Maximum safety working voltage: 17,500 volts.
Class 3 – Dielectric test voltage: 40,000 volts • Surface proof tested: 20,000 volts • Maximum safety working voltage: 26,000 volts.
Class 4 – Dielectric test voltage: 50,000 volts • Surface proof tested: 40,000 volts • Maximum safety working voltage: 36,000 volts.
Safety matting fully tested to specification ASTM D178
- Health & Safety regulation electrical safety matting
- Fully traceable supply
- Regulatory branding on reverse every 1000mm
- Ensures safety for operatives at lower voltage switchboard and high equipment areas
- Anti-slip finish
- Low maintenance
- Construction sites
- Assembly lines
The Rubber Company’s electrical safety matting is designed for protection in any environment using equipment with high voltage. Our rubber safety matting provides a safer working environment, complying with health & safety standards.
We supply electrical safety matting to BS921, BS EN 6111 and ASTM standards.
This rubber matting fully conforms to ASTM D178 standard.
Cut lengths available to order. Can also be supplied to order in colours and flame retardant, low smoke emission grades.
|Application||General Purpose, Health & Safety|
|Product||Anti Slip, Electrical Safety, Safety Surfacing|
|Class 1 Thickness||4.5mm|
|Class 2 Thickness||6.5mm|
|Class 3 Thickness||9.5mm|
|Class 4 Thickness||12.7mm|
|Class||Safe Working Voltage||Specifications Compound||Values|
|1 -||7,500 Volts||Compound:||SBR/NR|
|2 -||17,500 Volts||Hardness [shore A]:||65°|
|3 -||26,000 Volts||Density[SG]:||1.3|
|4 -||36,000 Volts||Tensile Strength:||5 MPA|
|Abrasion Resistance:||180 mm³|
The Rubber Company
Unit 27 Romsey Industrial Estate