Item Code: RC04129
Electrical Safety Matting made to Safety Standards
Electrical Rubber Matting – 450 volts working
This Electrical Safety Matting is a high quality rubber matting with a fine ribbed surface. This electrical rubber matting has the regulation standard stamped on the reverse of the roll at 1000mm intervals. This electrical safety matting is fully certified and tested to 11,000 volts with a recommended safe working voltage of 450 volts.
This rubber safety matting provides an anti-slip surface with fine ribbed finish on one side and a cloth impression finish on the reverse.
- Safety matting fully tested to specification
- Resistant to 450 V
- Health & Safety regulation electrical safety matting
- Fully traceable supply
- Regulatory branding on reverse every 1000mm
- Ensures safety for operatives at lower voltage switchboard and high equipment areas
- Anti-slip finish
- Low maintenance
- Construction sites
- Assembly lines
The Rubber Company’s electrical safety matting is designed for protection in any environment using equipment with high voltage. Our rubber safety matting provides a safer working environment, complying with health & safety standards.
We supply electrical safety matting to BS921, BS EN 6111 and ASTM standards.
Our 650 volt BS921 is the only matting that full conforms to BS921:1976 standard.
Cut lengths available to order. Can also be supplied to order in colours and flame retardant, low smoke emission grades.
|Application||Health & Safety|
|Product||Anti Slip, Electrical Safety, Safety Surfacing|
|Safe Working Voltage||450 Volts|
|Tested Up To||11,000 Volts|
|Roll Sizes||Weight [kg/M²]||Specifications Compound||Values|
|10m x 0.91m x 6mm||6.80||Compound:||SBR/NR|
|10m x 1.0m x 6mm||6.80||Hardness [shore A]:||65°|
|10m x 1.2m x 6mm||6.80||Density[SG]:||1.3|
|Tensile Strength:||5 MPA|
|Abrasion Resistance:||180 mm³|
The Rubber Company
Unit 27 Romsey Industrial Estate