Anti-Static Mats
Key Features
- Conforms to BS IEC 61340-5-1
- Highly flexible
- Excellent lay flat properties but easily studded if required for custom fits
- High resistance to oil
- High temperature resistance
- Highly resistant to abrasion
- High temperature resistance
- ESD properties outperform PVC based products (budget priced PVC mats do not resist solder or heat damage)
- No curling or deformation
- No fading in sunlight
- Easily cleanable with excellent resistance to detergents
- Good resistance to scratching, curling, pin holes
- Good recovery
- No irritant odour
Product Description
Conforms to BS IEC 61340-5-1
Two layer rubber with a dissipative top and conductive backing
The Rubber Company supply anti-static mats for use in ESD sensitive environments. These mats conform to meet BS IEC 61340-5-1 standards. All of our anti-static mats mats are incredibly low maintenance and provide excellent safety properties in a variety of applications.
The dissipative top layer of our anti-static mats provide great resistance to abrasion, heat, solders, flux as well as the most commonly used solvents. This ensures that our product is suitable for use in a wide variety of applications. It also helps to ensure that our anti static mats are able to maintain a long life expectancy.
The black bottom layer of our anti static mats are fully conductive. This ensures that the mats provide a high quality and consistent ground path. The material meets the requirements of EN61340-5-1 and US ESD Associations ANSI S4.1 and S20.20 guidelines and is also certified for ROHS regulations. The smooth texture also facilitates easy cleaning and maintenance.
Specifications
| Application: | Electrical equipment contact applications, Product assembly lines |
| Product: | Anti-Static Matting |
| Hardness (Shore A): | 60º |
| Material: | Synthetic rubber |
| Colour: | Grey, Blue, Beige, Green (variation possible between batches) |
Potential Applications
- Walkways
- Warehouses
- Construction sites
- Assembly lines
- Offices
Technical Data
| Properties | Test Method | Value | |
|---|---|---|---|
| Standard Roll Size | - | 1.2m x 10m | |
| Thickness | - | 2mm | |
| Tensile Strength | ASTM D412 | 8.0+/-1 [MPA] | |
| Elongation Break Point | ASTM D412 | 350%+/-50 | |
| Density | ASTM D1298 | 1.3+/-0.05 [SG] | |
| Tear Strength | ASTM D624 | 45+/-5 | |
| Abrasion Resistance | DIN 53516 | 85 | |
| Heat Resistance | - | Undamaged by iron and solder temperature 260º C | |
| Chemical Resistance | - | IPA, Acetone or common solvents will not produce discolouration | |
| UV Resistance | - | No discolouration or fading effect | |
| Stud Force | - | 6 kgs/ 59cm (Recommended) | |
| Surface Resistivity - Black | ASTM F150 | 103 - 105 | |
| Surface Resistivity - Colour | ASTM F150 | 107 - 109 |
