Hose Coupling & End Connection Systems
A range of coupling systems and end connections is available for our custom made and mandrel built rubber hoses. The appropriate connection depends on the operating pressure, conveyed material, flexibility requirements and installation conditions.
Built-in Fittings
Built-in fittings provide a secure, full-bore coupling system for medium to high-pressure industrial rubber hoses carrying non-corrosive and non-abrasive materials. Steel fittings are incorporated into the hose ends during manufacture and permanently vulcanised into the rubber body. The fittings are chemically bonded and mechanically locked into position using fully embedded retaining wire between single or twin retaining bands. This robust construction creates an integral hose assembly without the need for external clamps or retaining wires, providing a reliable connection for demanding industrial applications.
Built-In Rubber Lined Fittings (Fully Embedded)
Built-in rubber lined fittings provide a full-bore coupling system for medium to high-pressure applications involving corrosive or abrasive materials. Steel fittings are fully encapsulated in rubber and permanently vulcanised into the hose body, creating a continuous rubber-lined flow path that prevents conveyed materials from contacting metal components. The fittings are chemically bonded and mechanically secured using embedded retaining wire between single or twin retaining bands. This heavy-duty construction provides excellent protection against abrasion and corrosion while maintaining a secure, permanent connection.
Integral Fixed Flange
Integral fixed flanges provide a full-bore connection for low to medium-pressure industrial hoses, particularly those conveying abrasive or corrosive materials. Reinforcing cord plies extend from the hose body to form an integral rubber flange, supported by a vulcanised steel backing plate. This creates a secure, one-piece connection with a continuous rubber-lined bore. By eliminating a conventional rigid hose tail, the hose can flex immediately behind the flange, making this system particularly suitable for applications requiring tighter bend radii and more uniform curvature.
Double-Action Integral Fixed Flange
Double-action integral fixed flanges are designed for heavy-duty industrial hoses exposed to pressure pulsation, axial loading and hose extension. Developed from the standard integral fixed flange, this reinforced construction incorporates an additional embedded steel plate within the flange structure to improve strength and stability. The design helps minimise flange bending and reduces the risk of sealing loss under higher operating pressures, particularly where large flange pitch circle diameters are required. This coupling system also provides increased resistance to end-loading forces in demanding applications.
Beaded End Swivel Flange
Beaded end swivel flanges provide a secure, full-bore connection for medium to high-pressure rubber hoses conveying abrasive or corrosive materials. A tapered steel ring is fully encapsulated within rubber and reinforcing cord to create a strong retaining bead. A one-piece swivel flange sits behind the bead, allowing easier alignment during installation. Without a conventional rigid hose tail, the hose can flex immediately behind the flange, making this system particularly suitable for shorter assemblies requiring tighter bend radii, increased angular movement and resistance to end-loading forces.
Internally Swaged Fittings
Internally swaged fittings provide a secure, full-bore coupling system for medium to high-pressure industrial rubber hoses conveying non-corrosive and non-abrasive materials. The fitting is mechanically expanded from inside the hose, creating a strong connection between the fitting and hose body. This process maintains a smooth internal flow path without significant restrictions or steps at the hose tail, helping to minimise flow resistance. Internal swaging is particularly suitable for demanding industrial applications requiring reliable connections, efficient material transfer and higher operating pressures.
Plain Cuffed End
Plain cuffed ends provide a versatile connection option for industrial rubber hoses designed to accommodate separately installed hose tails and fittings. During manufacture, embedded reinforcing wire is terminated a specified distance from the hose end, creating a flexible cuff that can accommodate fittings secured using clamps, straps or wire. The exposed ends of reinforcing fabrics can also be encapsulated with rubber to protect against corrosion and contamination. This construction provides a smooth, solid rubber appearance while allowing flexibility in the selection and installation of suitable hose connections.
Enlarged Cuffed End
Enlarged cuffed ends feature an expanded internal diameter at the hose ends to accommodate inserted fittings while maintaining an uninterrupted flow path. The hose ends are formed into a larger, bell-shaped opening, allowing suitable hose tails to be installed without reducing the effective internal bore. As with plain cuffed ends, reinforcing wire is terminated a specified distance from the end, enabling fittings to be secured using clamps, straps or wire. Reinforcing fabrics can also be rubber capped to provide additional protection against contamination and corrosion.
Choosing the Right Hose Coupling System
The following table provides a general guide to the available coupling configurations.
Pressure classifications are indicative only. Final suitability depends on hose construction, dimensions, fittings, conveyed materials and operating conditions.
Bespoke Hose Manufacturing
Our bespoke rubber hose manufacturing capabilities enable us to supply hose assemblies tailored to specific industrial applications, installation requirements and operating conditions.
From large diameter suction and discharge hoses to specialist rubber sleeves, flexible connections and reinforced hose assemblies, we can provide solutions designed around individual project specifications.
Customisation options include rubber compound selection, hose diameter, wall thickness, reinforcement construction, overall length and coupling configuration.
For specialist applications, hoses can also incorporate embedded steel rings, wire reinforcement and rubber-lined fittings to provide additional resistance to abrasion, vacuum forces and external loading.
Whether you require a replacement industrial hose or a completely bespoke assembly, our team can assist in identifying a suitable construction for your requirements.
Information Required for Bespoke Hose Enquiries
To help us identify the most suitable hose construction for your application, please provide the following information where available:
- Required hose diameter and overall length.
- Material or substance being conveyed.
- Operating pressure or vacuum requirements.
- Operating temperature range.
- Required flexibility or bend radius.
- Preferred coupling or flange configuration.
- Technical drawings, photographs or existing samples.
Need a Custom Made Rubber Hose?
Our team can help identify a suitable hose construction, reinforcement configuration and coupling system for your application.
Or contact us to discuss your project
| ☎ | +44 (0) 1794 513 184 |
| ✉ | sales@therubbercompany.com |
FAQs
A mandrel built hose is manufactured by applying layers of rubber and reinforcement around a rigid internal form, known as a mandrel. This process enables the manufacture of large diameter hoses, specialist constructions and bespoke reinforced assemblies.
Our custom made rubber hoses are available in diameters from 50mm to 1000mm, with lengths up to 12 metres, depending on the construction and application.
Discharge hoses are designed primarily to convey materials under positive pressure, while suction hoses incorporate additional reinforcement to help prevent collapse under vacuum conditions.
Yes. We can supply a range of integral flanges, built-in fittings, swivel flanges and cuffed end connections to suit specific installation requirements.
Yes. Suitable rubber compounds, reinforced constructions and rubber-lined coupling systems can be specified for abrasive materials such as slurry, sand and dredged materials.
Yes. Bespoke hoses can be manufactured to suit existing dimensions, drawings, samples and application requirements, subject to technical assessment.