Electrical Safety Matting 7,500v Maximum
Key Features
- Safety matting fully tested to specification ASTM D178 ANSI JS.7
- Resistant to 7500 V
- Health & Safety regulation electrical safety matting
- Fully traceable supply
- Regulatory branding on reverse every 1000mm
- Ensures safety for operatives at lower voltage switchboard & high equipment areas
- Anti-slip finish
- Low maintenance
Product Description
This electrical safety matting 7,500v is independently tested to meet ASTM D178 ANSI JS.7 safety standards. It provides a safe working surface up to 7,500 volts. This high-quality rubber roll is perfect for use in any environment using high voltage equipment. It also features the regulation standard symbol stamped on the reverse of the roll at 1000mm intervals.
The top surface of our electrical safety matting 7,500v features a fine ribbed finish on the top surface. This greatly increases the surface area of the mat, which helps to disperse electric charge. The fine ribs also provide additional anti-slip properties to increase safety. The underside features a cloth impression finish to provide superior gripping properties as well as being easy to maintain.
Dielectric test voltage: 20,000 volts • Surface proof tested: 10,000 volts • Maximum safety working voltage: 7,500 volts.
Matting Conforms To
- ASTM D178 Type 2, Section 5
- Class 5.1.2.1-A Ozone Resistant
- Class 5.1.2.2-B Flame Resistant
- Class 5.1.2.3-C Oil Resistant
Specifications
| Application: | Health & Safety |
| Product: | Anti Slip, Electrical Safety, Safety Surfacing |
| Hardness (Shore A): | 60° |
| Safe Working Voltage: | 7500 Volts |
| Material: | Natural rubber / SBR |
| Colour: | Black |
Potential Applications
- Walkways
- Warehouses
- Construction sites
- Assembly lines
- Offices
Technical Data
| Roll Sizes | Weight [kg/M²] | Specifications Compound | Values |
|---|---|---|---|
| 10m x 0.91m x 4.5mm | 5.85 | Compound | SBR/NR |
| 10m x 0.91m x 6.5mm | 8.45 | Hardness [Shore A] | 60° |
| 10m x 0.91m x 10mm | 13.00 | Density [SG] | 1.3 |
| Tensile Strength | 5 MPA | ||
| Elongation [min] | 250% | ||
| Abrasion Resistance | 200 mm³ | ||
| Minimum Temperture | -20°C | ||
| Maximum Temperture | +120°C |
