TICO® Contact S Adhesive
Key Features
- Compatible with all TICO® Elastomer pads
- Designed for use in wide ranging environmental conditions
- Excellent adhesion and heat resistance
- Suitable for bonding to concrete, metal, brick, ceramics, and timber
Product Description
TICO® Contact S Adhesive is created from a synthetic elastomer-based adhesive specially formulated for bonding TICO® pads to a diverse array of floor materials and machine structures. This cream-colored, brushable adhesive serves as a versatile, general-purpose contact adhesive, demonstrating outstanding adhesion to various surfaces and possessing commendable heat resistance. Available in sizes 1 litre or 5 litre.
Preparation
Stir adhesive thoroughly before use. Ensure the surfaces to be bonded are clean, dry and free from dirt, grease and other contamination. Lightly abrade metal surfaces. Wipe clean with a suitable solvent such as methylated spirit.
Application
Apply a thin, even coat of adhesive to both surfaces. Allow to become touch-dry (approx.10 – 30 minutes). On very absorbent surfaces a second coat may be required. Align carefully and bring the two surfaces together. Apply firm pressure over the whole surface, ideally using a roller or press to consolidate the bond. The adhesive forms an immediate, strong bond, but will achieve maximum strength after a few days.
Coverage
3 to 4m² per litre, depending on surface (apply to both surfaces).
The newly bonded material should not be subjected to extreme temperature changes for 3 to 4 days after bonding and avoid further fabrication until the adhesive has fully cured.
Health and Safety
Read the product label before use. Further details can be obtained from the Health and Safety Data Sheet.
