TICO® Grip Type Pipe Clamps
Key Features
- Caters for movements in the pipe due to e.g. thermal expansion and contraction
- Temperature Range -50°C to +120°C continuous, +150°C intermittent
- Isolates the pipe from the mounting bolts and clamps to prevent fretting and corrosion
- Maintains pipe spacing of multiple pipe runs over long spans
- Supports and positively locates pipework over long spans
- Maintenance free and long service life
Product Description
TICO® Grip Type Pipe Clamps are crafted using a high-grade galvanised or stainless steel U-bolt enclosed in a moulded sleeve made of TICO® fire retardant (FR) material that does not facilitate the spread of flames across surfaces. They have a ribbed rubber inner face that securely holds the pipe in place while accommodating small axial and torsional movements of the pipe..
They are meticulously designed to reduce vibration levels between the pipework and hanger, contributing to the prevention of electrolytic corrosion and have a temperature range of -50°C to +120°C with an intermittent use of +150°C.
TICO® Grip Type Pipe Clamps (Ribbed Rubber Inner Face)
| Black FR Sleeve & Pad | Red FR Sleeve & Pad | ||
|---|---|---|---|
| To Suit Pipe Inside Diameter (ID - mm/inch) | To Suit Pipe Outside Diameter (OD - mm) | Product Code (To Suit SS Pipe*) | Product Code (To Suit Cu/NI Pipe**) |
| 12.7 / ½ | 21 | RC1159-SS-1/2 | RC1159-C-1/2 |
| 19 / ¾ | 27 | RC1159-SS-3/4 | RC1159-C-3/4 |
| 25.4 / 1 | 34 | RC1159-SS-1 | RC1159-C-1 |
| 31.75 / 1¼ | 43 | RC1159-SS-1-1/4 | RC1159-C-1-1/4 |
| 38.1 / 1½ | 49 | RC1159-SS-1-1/2 | RC1159-C-1-1/2 |
| 50.8 / 2 | 61 | RC1159-SS-2 | RC1159-C-2 |
| 63.5 / 2½ | 76 | - | RC1159-C-2-1/2 |
| 76.2 / 3 | 89 | RC1159-SS-3 | RC1159-C-3 |
| 101.6 / 4 | 115 | RC1159-SS-4 | RC1159-C-4 |
| 152.4 / 6 | 168 | RC1159-SS-6 | RC1159-C-6 |
| 203.2 / 8 | 219 | RC1159-SS-8 | RC1159-C-8 |
*For stainless steel (SS) pipes, the OD’s of pipes are based on BS 3974 Part 1 1974 Table 10.
**For Cu/Ni pipes (based on seamless ‘Kunifer 10’ sizes). OD’s of pipes conform to BS 2871 Part 2 Table 3. BS MA 18 Table 2 BS MA60. Also suitable for OD stainless steel tubing.
