TICO® High Temperature Guide Type Pipe Clamp
Key Features
- Temperature range of -60°C to +300°C, +350°C intermittent
- Isolates pipe from the mounting bolts and clamps to prevent fretting and corrosion
- Maintains pipe spacing of multiple pipe runs over long spans
- Unrivalled level of cushioning and support
- Does not support the surface spread of flame
- Easy to install with long service life
Product Description
TICO® High Temperature (VHT) Guide Type Pipe Clamps are designed to minimise vibration transmission between pipework and hanger, and prevent corrosion between different metals. They are engineered for the straightforward and effective clamping of thin wall pipes providing an unrivalled level of cushioning and support.
They consist of a high-grade galvanised or stainless steel U-bolt enclosed in a flame retardant high temperature moulded sleeve and ideally suited for applications where temperatures may be expected to range from –60°C to +300°C continuous, +350°C intermittent. The Pipe Support is also resistant to a wide range of oils and environmental conditions.
TICO® VHT Guide Type Pipe Clamps
| Yellow VHT Sleeve & Pad | |||
|---|---|---|---|
| To Suit Pipe Inside Diameter (ID - mm/inch) | To Suit Pipe Outside Diameter (OD - mm) | Product Code (To Suit SS Pipe*) | Product Code (To Suit Cu/NI Pipe**) |
| 12.7 / ½ | 21 | RC1168-SS-1/2 | RC1168-C-1/2 |
| 19 / ¾ | 27 | RC1168-SS-3/4 | RC1168-C-3/4 |
| 25.4 / 1 | 34 | RC1168-SS-1 | RC1168-C-1 |
| 31.75 / 1¼ | 43 | RC1168-SS-1-1/4 | RC1168-C-1-1/4 |
| 38.1 / 1½ | 49 | RC1168-SS-1-1/2 | RC1168-C-1-1/2 |
| 50.8 / 2 | 61 | RC1168-SS-2 | RC1168-C-2 |
| 63.5 / 2½ | 76 | - | RC1168-C-2-1/2 |
| 76.2 / 3 | 89 | RC1168-SS-3 | RC1168-C-3 |
| 101.6 / 4 | 115 | RC1168-SS-4 | RC1168-C-4 |
| 152.4 / 6 | 168 | RC1168-SS-6 | RC1168-C-6 |
| 203.2 / 8 | 219 | RC1168-SS-8 | RC1168-C-8 |
*For (SS) stainless steel pipes, the OD’s of pipes are based on BS 3974 Part 1 1974 Table 10.
**For Cu/Ni pipes (based on seamless ‘Kunifer 10’ sizes). OD’s of pipes conform to BS 2871 Part 2 Table 3. BS MA 18 Table 2 BS MA60. Also suitable for OD stainless steel tubing.
