TICO® CV/CA - Reinforced Structural Bearing Pad
Item Code:
RC1183
Request a quotation
Key Features
- Suitable for a wide range of very high stress bearing applications
- Reinforced with high tensile fabric to strengthen the material
- Maximum recommended working stress 7000 kN/m²
- Less susceptible to the effects of shape than other types of rubber/steel laminated bearings
- Temperature range -30°C to +70°C
Product Description
TICO® CV/CA – Reinforced Structural Bearing Pad is typically used for isolating medium to large structures from ground-borne vibration although they can also be successfully employed in other applications, e.g. isolation of internal structures or high stress seatings in bridge bearing applications. It is manufactured from vulcanised laminates of polychloroprene based rubber reinforced with high tensile fabric and enhanced with cork particles.
Available in thicknesses of 25mm, 50mm, 100mm, 125mm. Non-standard sizes and thicknesses available on request.
Bearing pads can be supplied with a protective Hypalon lacquer edge proofing if required.
Technical Data
| Specifications | Value | ||
|---|---|---|---|
| Material | Vulcanised laminates of polychloroprene based rubber with high tensile fabric and enhanced with cork particles | ||
| Maximum Working Stress | 7000 kN/m² | ||
| Working Stress Range | 4500 to 7000 MN/m² | ||
| Hardness | 75° ± 5° IRHD | ||
| Density (Typical) | 1150kg/m³ | ||
| Temperature Range | -30°C to +70°C | ||
| Typical Damping Ratio | 0.043 to 0.053 | ||
| Standard Size | 1200mm x 1000mm | ||
| Thicknesses | 25mm, 50mm, 100mm, 125mm |
