Economy Grade Nitrile Sheeting
Key Features
- Cost efficient sheeting
- Highly versatile
- Easy to cut to size
- Excellent flexibility
- Wide temperature range
- Many sizes available from stock
Product Description
Our economy grade nitrile sheeting is perfect for customers who are looking for a low-cost sheeting option. It benefits from the wide temperature range, and flexibility of rubber to provide protection in many general-purpose applications. We can supply this particular product in a wide selection of thicknesses from 1mm to 40mm. This product is available with a width of 1.4m and lengths of either 10m, 5m or 1m as standard. We can however, produce custom finishes, grades and colours, subject to minimum order quantities.
In commercial and private use applications our customers require rubber sheeting without the need for chemical, fuel and fire resistance. This means that certain customers could end up paying for material properties which they did not require. Our economy grade nitrile sheeting is the solution to this problem. It provides the look and feel of many of our higher-grade sheeting products, at a fraction of the cost.
Please note: To manufacture this product we blend an amount of reclaimed materials with base polymers and fillers. This can cause minor surface deformations, blemishes and materials may be more odorous than normal. However, the product will still provide the same properties and perform to the same standard.
Specifications
| Application: | Light use applications where the material will not be put under much stress |
| Product: | General Purpose Sheeting |
| Hardness (Shore A): | 70° |
| Material: | Nitrile / SBR |
| Colour: | Black |
Potential Applications
- General purpose applications
- Packing pieces
- Dust seals
- Protection pads
- Decorative trim
Technical Data
| Standard Roll Sizes | Weight kg/m2 | Properties | Values |
|---|---|---|---|
| 1mm x 1.4m x 10m | +/‐ 0.2mm | Compound | NBR/SBR |
| 1.5mm x 1.4m x 10m | +/‐ 0.3mm | Density (Specific Gravity) | 1.40 g/cm2 |
| 3mm x 1.4m x 10m | +/‐ 0.3mm | Tensile Strength | 3.5 N/mm2 |
| 4mm x 1.4m x 10m | +/‐ 0.4mm | Elongation at Break | 250% |
| 5mm x 1.4m x 10m | +/‐ 0.4mm | Compression Set (22hrs @ 70°C) | N/A |
| 6mm x 1.4m x 10m | +/‐ 0.5mm | Minimum Temperature | -28°C |
| Made To Order | Maximum Temperature | +80°C | |
| 8mm x 1.4m x 5m | +/‐ 0.7mm | ||
| 10mm x 1.4m x 5m | +/‐ 1mm | ||
| 15mm x 1.4m x 5m | +/‐ 1mm | ||
| 20mm x 1.4m x 5m | +/‐ 1.4mm | ||
| 25mm x 1.4m x 5m | +/‐ 1.75mm | ||
| 32mm x 1m x 1m | - | ||
| 38mm x 1m x 1m | - | ||
| 40mm x 1m x 1m | - |
