commercial nitrile insertion sheeting

Commercial Nitrile Insertion Sheeting - 1 Ply Reinforced

Item Code: RC0342
Request a quotation

Key Features

  • High quality material
  • Excellent versatility
  • Good resistance to fuel & chemical damage
  • Good flexing, anti-creep & stretching resistance
  • Highly durable
  • Wide range of thicknesses available

Product Description

Our commercial nitrile insertion sheeting is a medium-grade material that combines the excellent resistance of nitrile with a 1 ply reinforcement. This provides the material with additional tear resistance and tensile strength properties for use in physically demanding applications. We can supply this material in a variety of thicknesses from 0.5mm to 40mm to suit your requirements. We can also produce it in a range of formats such as; full rolls, strip cut lengths as well as bespoke gaskets and cut shapes.

Subject to minimum order quantities, we can produce custom grades, colours and finishes to your exact requirements.

The 1 ply polyester fabric reinforcement we use in our commercial nitrile insertion sheeting creates a balance between cost and durability. We can also insert additional reinforcement layers as a special order for superior physical resistance. We typically supply this material for use in low to medium range applications. Our customers regularly use this material as; insulating strips, dust seals, protection pads and gaskets.

Our reinforced nitrile sheeting is also REACH, RoHS, PAH as well as CE Compliant.


Application: Sealing & protection in low to medium range applications
Product: Commercial Nitrile Insertion Sheeting
Hardness (Shore A): 70°
Material: Nitrile / SBR / Polyester
Colour: Black

Potential Applications

  • Sealing applications
  • Gaskets
  • Flange gaskets on pipes & tanks
  • Insulating strip
  • Isolation barriers
  • Construction seals
  • Expansion joints
  • Dust seals & covers

Technical Data

Standard Roll Sizes Tolerance Properties Values
1mm x 1.4m x 10m +/‐ 0.2mm Compound NBR / SBR / Polyester
1.5mm x 1.4m x 10m +/‐ 0.3mm Density (Specific Gravity) 1.40 g/cm2
3mm x 1.4m x 10m +/‐ 0.3mm Tensile Strength 5 N/mm2
4mm x 1.4m x 10m +/‐ 0.4mm Elongation at Break 300%
5mm x 1.4m x 10m +/‐ 0.4mm Minimum Temperature -15°C
6mm x 1.4m x 10m +/‐ 0.5mm Maximum Temperature +90°C
Made To Order Compression Set (70°C for 22 hours) 35%
8mm x 1.4m x 5m +/‐ 0.7mm
10mm x 1.4m x 5m +/‐ 1mm
15mm x 1.4m x 5m +/‐ 1mm
20mm x 1.4m x 5m +/‐ 1.4mm
25mm x 1.4m x 5m +/‐ 1.75mm
32mm x 1m x 1m -
38mm x 1m x 1m -
40mm x 1m x 1m -
Contact Form Product Catalogue Request a quotation