High Temperature Silicone Adhesive – 90ml
Item Code:
RC13-S736
Request a quotation
Key Features
- Non-slumping sealant
- Will not sag or run
- May be applied overhead or on side walls
- Not recommended for use on concrete, brick, mortar, painted surfaces, Teflon-coated materials, sensitive metals
- Operating temperature range of -65°C to +260°C (+315°C intermittent)
Product Description
Our high temperature silicone adhesive is a one-component, non-slumping sealant designed for applications which are subject to temperatures up to 315°C.
This adhesive cures to a rubbery solid at room temperature on exposure to water vapor in the air. At 25°C with 50% RH, it forms a tack-free skin within 17 minutes and will fully cure to full strength after 24 hours (3mm bead).
If this is not the product you are looking for, take a look at our whole range of adhesives and sealants.
Technical Data
| Property | Value | ||
|---|---|---|---|
| Product: | 1 Part Adhesive | ||
| Colour: | Red | ||
| Cure speed (25°C, 50% RH): | 24 hours per 3mm (bead thickness) | ||
| Skin-over time: | 10 minutes | ||
| Tack-free time: | 17 minutes | ||
| Flow/Slump: | Nil | ||
| Extrusion rate (3mm orifice, 90psi / 6.2 bar): | 390g/min | ||
| Specific gravity: | 1.04 | ||
| Cured hardness (Shore A): | 26° | ||
| Cured tensile strength: | 2.41mPa | ||
| Cured elongation at break: | 600% |
